Instructions

Fernsteuerbefehle
R&S
®
Scope Rider RTH
370Bedienhandbuch 1326.1578.03 ─ 10
Note that this setting only affects the graphical result display; it has no effect on the
selection of harmonics for which results are provided during a file export (manually or
via remote command). For that purpose, use HARMonic:LIMits:TYPE
auf Seite 372.
Harmonics that were previously eliminated by the HARMonic:LIMits:TYPE com-
mand cannot be displayed.
Parameter:
<Selection> ALL | EVEN | ODD | ODD3 | ODN3 | USER
ODD3
All harmonics with an odd-numbered order that is a multiple of 3
ODN3
All harmonics with an odd-numbered order that cannot be divi-
ded by 3
USER
Selects a user-defined number of harmonics. Define the number
of harmonics using the HARMonic:DISPlay:USER command.
*RST: ALL
HARMonic:DISPlay:USER <MaxHarmonics>
Determines the maximum number of harmonics to be displayed in the bargraph. This
command requires a preceding HARM:DISP:TYPE USER command.
Note that this setting only affects the graphical result display; it has no effect on the
selection of harmonics for which results are provided during a file export (manually or
via remote command). For that purpose, use HARMonic:LIMits:TYPE
auf Seite 372.
Harmonics that are eliminated by the HARMonic:LIMits:TYPE command cannot be
displayed.
Parameter:
<MaxHarmonics> Bereich: 1 bis 64
Inkrement: 1
*RST: 10
Beispiel:
HARM:DISP:TYPE USER
HARM:DISP:USER 25
Displays the first 25 harmonics.
HARMonic:FUNDamental:CURRent?
Rückgabewerte:
<CurrFreq> Bereich: 10 bis 1000
Inkrement: 0.01
*RST: 50
Std-einheit: Hz
Verwendung: Nur Abfrage
Spektrumanalyse