Instructions

Fernsteuerbefehle
R&S
®
Scope Rider RTH
361Bedienhandbuch 1326.1578.03 ─ 10
SPECtrum:WAVeform:MAXimum[:ENABle] <State>
Displays the „Max Hold“ spectrum trace.
Parameter:
<State> ON | OFF
*RST: OFF
SPECtrum:WAVeform:MINimum[:ENABle] <State>
Displays the „Min Hold“ spectrum trace.
Parameter:
<State> ON | OFF
*RST: OFF
SPECtrum:WAVeform:SPECtrum[:ENABle] <State>
Displays the clear/write spectrum trace.
Parameter:
<State> ON | OFF
*RST: ON
SPECtrum:FREQuency:RESet
Clears the results for previous measurements used in statistical evaluation (see
SPECtrum:WAVeform:AVERage[:ENABle], SPECtrum:WAVeform:MAXimum[:
ENABle], SPECtrum:WAVeform:MINimum[:ENABle] and SPECtrum:
FREQuency:AVERage:COUNt auf Seite 358).
Verwendung:
Ereignis
15.6.2.2 Cursor-Messungen im Spektrum-Modus
Für den Spektrum-Modus sind spezielle Cursor-Befehle verfügbar.
SPECtrum:CURSor<m>:STATe.......................................................................................361
SPECtrum:CURSor<m>:SOURce....................................................................................362
SPECtrum:CURSor<m>:COUPling.................................................................................. 362
SPECtrum:CURSor<m>:SCPLing....................................................................................362
SPECtrum:CURSor<m>:FREQuency[:VALue]...................................................................363
SPECtrum:CURSor<m>:FREQuency:DELTa?.................................................................. 363
SPECtrum:CURSor<m>:LEVel[:VALue]?..........................................................................363
SPECtrum:CURSor<m>:LEVel:DELTa?........................................................................... 363
SPECtrum:CURSor<m>:SCReen.................................................................................... 364
SPECtrum:CURSor<m>:STATe <State>
Enables or disables the spectrum cursor measurement.
Spektrumanalyse