Instructions

Fernsteuerbefehle
R&S
®
Scope Rider RTH
345Bedienhandbuch 1326.1578.03 ─ 10
CALCulate:MATH:VERTical:SCALe <Scale>
Sets the vertical scale (vertical sensitivity) of the math waveform.
Parameter:
<Scale> Scale value, in V/div.
Verwendung: SCPI-konform
CALCulate:MATH:VERTical:RANGe <Position>
Sets the voltage range across the 8 vertical divisions of the diagram. Use the com-
mand alternatively to CALCulate:MATH:VERTical:SCALe.
Parameter:
<Position> Voltage value of the range
Verwendung: SCPI-konform
CALCulate:MATH:VERTical:POSition <Position>
Moves the math waveform or down in the diagram.
Parameter:
<Position> Position value, given in divisions.
Verwendung: SCPI-konform
15.4.5 Referenzmesskurven
REFCurve:SOURce....................................................................................................... 345
REFCurve:UPDate.........................................................................................................345
REFCurve:STATe.......................................................................................................... 346
REFCurve:POSition....................................................................................................... 346
REFCurve:NAME...........................................................................................................346
REFCurve:SAVE............................................................................................................346
REFCurve:OPEN........................................................................................................... 346
REFCurve:DELete......................................................................................................... 346
REFCurve:SOURce <Source>
Selects the waveform to be taken as reference waveform.
Parameter:
<Source> C1 | C2 | C3 | C4 | M1
*RST: C1
REFCurve:UPDate
Creates the reference waveform from the source waveform.
Messkurvenanalyse