Instructions

Fernsteuerbefehle
R&S
®
Scope Rider RTH
328Bedienhandbuch 1326.1578.03 ─ 10
Parameter:
<Condition> LONGer | SHORter | EQUal | NEQual | WITHin | OUTSide
LONGer | SHORter
Triggers on pulses shorter or longer than a runt width that is set
using TRIGger:SLEW:RATE.
EQUal | NEQual
Triggers on pulses equal or not equal a given runt width that is
set using TRIGger:SLEW:RATE. In addition, a tolerance can be
set around the specified width using TRIGger:RUNT:DELTa.
WITHin | OUTSide
Triggers on pulses inside or outside a given range. The range is
set using ... and ....
*RST:
LONGer
TRIGger:SLEW:RATE <Duration>
Sets the slew rate for comparison ranges EQUal, UNEQual, SHORter, and LONGer.
See TRIGger:SLEW:RANGe.
Parameter:
<Duration> Bereich: 800E-12 bis 10000
Inkrement: 100E-9
*RST: 5E-9
Std-einheit: s
TRIGger:SLEW:DELTa <Tolerance>
Sets a range Δt to the specified slew rate, which is defined using TRIGger:SLEW:
RATE.
Parameter:
<Tolerance> Bereich: 0 bis 5000
Inkrement: 500E-12
*RST: 0
Std-einheit: s
TRIGger:SLEW:MINWidth <MinDuration>
Sets the lower time limit of the transition time for comparisons WITHin and OUTSide.
Parameter:
<MinDuration> Bereich: 800E-12 bis 10000
Inkrement: 100E-9
*RST: 5E-9
Std-einheit: s
Grundeinstellungen