Instructions

Fernsteuerbefehle
R&S
®
Scope Rider RTH
316Bedienhandbuch 1326.1578.03 ─ 10
Parameter:
<Condition> LONGer | SHORter | EQUal | NEQual | WITHin | OUTSide
LONGer | SHORter
Triggers on pulses shorter or longer than a width set using
TRIGger:WIDTh:WIDTh.
EQUal | NEQual
Triggers on pulses equal or not equal a given width that is set
using TRIGger:WIDTh:WIDTh. In addition, a tolerance can be
set around the specified width using TRIGger:WIDTh:DELTa.
WITHin | OUTSide
Triggers on pulses inside or outside a given range. The range is
set using TRIGger:WIDTh:MIN and TRIGger:WIDTh:MAX.
*RST:
LONGer
TRIGger:WIDTh:WIDTh <Duration>
Sets the width for comparison ranges EQUal, UNEQual, SHORter, and LONGer.
See TRIGger:WIDTh:RANGe auf Seite 315
Parameter:
<Duration> Bereich: 800E-12 bis 10000
Inkrement: 100E-9
*RST: 5E-9
Std-einheit: s
TRIGger:WIDTh:DELTa <Tolerance>
Sets a range Δt to the specified width, which is defined using TRIGger:WIDTh:WIDTh
.
Parameter:
<Tolerance> Bereich: 0 bis 5000
Inkrement: 500E-12
*RST: 0
Std-einheit: s
TRIGger:WIDTh:MAX <MaxDuration>
Sets the upper limit for the pulse width if TRIGger:WIDTh:RANGe is set to WITHin or
OUTSide.
Parameter:
<MaxDuration> Bereich: 800E-12 bis 10000
Inkrement: 100E-9
*RST: 5E-9
Std-einheit: s
Grundeinstellungen