Instructions

Fernsteuerbefehle
R&S
®
Scope Rider RTH
307Bedienhandbuch 1326.1578.03 ─ 10
CHANnel<m>:THReshold:FINDlevel
The instrument sets the threshold for the selected channel.
Suffix:
<m>
.
1|2 (RTH1002) , 1..4 (RTH1004)
Verwendung: Ereignis
15.3.3 Horizontale Einstellung
TIMebase:SCALe...........................................................................................................307
TIMebase:RANGe..........................................................................................................307
TIMebase:HORizontal:POSition.......................................................................................307
TIMebase:REFerence.....................................................................................................308
ACQuire:POINts:ARATe?............................................................................................... 308
TIMebase:SCALe <Scale>
Sets the time scale of the horizontal axis for all signals.
Parameter:
<Scale> Bereich: 1E-9 bis 500
Inkrement: Steps 1, 2, 5 (1, 2, 5, 10, 20, 50, 100, 200, 500...)
*RST: 100E-9
Std-einheit: s/div
TIMebase:RANGe <AcquisitionTime>
Sets the acquisition time, the timerange across the 10 horizontal divisions of the dia-
gram. Use the command alternatively to TIMebase:SCALe.
Parameter:
<AcquisitionTime> Bereich: 10E-9 bis 5000
Inkrement: Steps 1, 2, 5 (1, 2, 5, 10, 20, 50, 100, 200, 500...)
*RST: 1E-6
Std-einheit: s
TIMebase:HORizontal:POSition <Position>
Sets the horizontal position of the trigger point in relation to the reference point.
See also: " Horizontale Position (Horizontal Position)" auf Seite 49
Parameter:
<Position> Bereich: Depends on the time scale, see table below.
Inkrement: 0.1
*RST: 0
Std-einheit: s
Grundeinstellungen