Instructions

General Instrument Setup
R&S
®
Scope Rider RTH
289User Manual 1326.1578.02 ─ 15
Contrast Mode
If enabled, the waveforms are displayed in black color on white background.
Remote command:
DISPlay:CONTrast on page 507
Persistence Type
Defines how long every new data point remains on the screen.
"Off, Last Acq"
Deactivates persistence and displays the last acquisition.
"Off, Multiple
Acq"
Deactivates persistence and displays multiple acquisitions.
"Time"
Data points remain on the screen for the duration defined with Persis-
tence Time.
"Infinite"
Data points remain on the screen infinitely until persistence is set to
"Off, Multiple Acq".
Remote command:
DISPlay:PERSistence[:TYPE] on page 506
Persistence Time
User-defined persistence time if "Persistence Type" is "Time". Each new data point
remains on the screen for the duration defined here.
Remote command:
DISPlay:PERSistence:TIME on page 507
Grid Mode
Defines the grid display. A grid helps you identify the position of specific data points.
"Off"
No grid is shown.
"Dots"
Dots mark the intersections of the gridlines.
"Lines"
Displays the grid as horizontal and vertical lines.
Brightness
Changes the brightness of the touchscreen.
Show Probe Settings
Defines how long the probe settings of active channels are shown when you press a
channel key. The settings are shown on the top of the display.
The probe settings are always shown as long as the "Vertical" menu is open.
Display Dimmed After
Defines when the display switches off if it is not used. Switching off the display saves
energy and prolongs the battery's operating time.
Intensity (%)
Changes the intensity of the waveforms on the screen.
Display Settings