Instructions
Table Of Contents
- Cover
- Contents
- 1 For Your Safety
- 2 Getting Started
- 3 Waveform Setup
- 3.1 Connecting Probes
- 3.2 Vertical Setup
- 3.3 Horizontal Setup
- 3.4 Acquisition Control
- 3.5 Roll Mode
- 3.6 Trigger
- 3.6.1 General Trigger Settings
- 3.6.2 Edge Trigger
- 3.6.3 Glitch Trigger
- 3.6.4 Width Trigger
- 3.6.5 Video/TV Trigger
- 3.6.6 External Trigger (R&S RTH1002)
- 3.6.7 Pattern Trigger (R&S RTH-K19)
- 3.6.8 State Trigger (R&S RTH-K19)
- 3.6.9 Runt Trigger (R&S RTH-K19)
- 3.6.10 Slew Rate Trigger (R&S RTH-K19)
- 3.6.11 Data2Clock Trigger (R&S RTH-K19)
- 3.6.12 Serial Pattern Trigger (R&S RTH-K19)
- 3.6.13 Timeout Trigger (R&S RTH-K19)
- 3.6.14 Interval Trigger (R&S RTH-K19)
- 3.6.15 Window Trigger (R&S RTH-K19)
- 3.6.16 Protocol Trigger (R&S RTH-K1, -K2, -K3, -K9 and -K10)
- 4 Waveform Analysis
- 5 Mask Testing
- 6 Spectrum Analysis
- 6.1 FFT Mode
- 6.2 Spectrum Mode (Option R&S RTH-K18)
- 6.3 Harmonics Measurement (Option R&S RTH-K34)
- 7 Multimeter Measurements
- 8 Data Logging
- 9 Protocol Analysis
- 10 Logic Analyzer (R&S RTH-B1 MSO)
- 11 Frequency Counter (R&S RTH-K33)
- 12 Documenting Results
- 13 General Instrument Setup
- 14 Network Connections
- 15 Remote Control Commands
- 15.1 Conventions used in Command Description
- 15.2 Mode
- 15.3 Waveform Setup
- 15.3.1 Automatic Setup
- 15.3.2 Vertical Setup
- 15.3.3 Horizontal Setup
- 15.3.4 Acquisition Control
- 15.3.5 Trigger
- 15.3.5.1 General Trigger Settings
- 15.3.5.2 Edge Trigger
- 15.3.5.3 Glitch Trigger
- 15.3.5.4 Width Trigger
- 15.3.5.5 Video/TV Trigger
- 15.3.5.6 External Trigger (R&S RTH1002)
- 15.3.5.7 Pattern Trigger (R&S RTH-K19)
- 15.3.5.8 State Trigger (R&S RTH-K19)
- 15.3.5.9 Runt Trigger (R&S RTH-K19)
- 15.3.5.10 Slew Rate Trigger (R&S RTH-K19)
- 15.3.5.11 Data2Clock Trigger (R&S RTH-K19)
- 15.3.5.12 Serial Pattern Trigger (R&S RTH-K19)
- 15.3.5.13 Timeout Trigger (R&S RTH-K19)
- 15.3.5.14 Interval Trigger (R&S RTH-K19)
- 15.3.5.15 Window Trigger (R&S RTH-K19)
- 15.4 Waveform Analysis
- 15.5 Mask Testing
- 15.6 Spectrum Analysis
- 15.7 Digital Multimeter (R&S RTH1002)
- 15.8 Voltmeter (R&S RTH1004)
- 15.9 Counter Mode (R&S RTH-K33)
- 15.10 Data Logging
- 15.11 Protocol Analysis
- 15.12 Logic Analyzer (R&S RTH-B1 MSO)
- 15.13 Documenting Results
- 15.14 General Instrument Setup
- 15.15 WLAN Connection (Option R&S RTH-K200/200US)
- 15.16 User Scripting (R&S RTH-K38)
- Annex
- List of Commands
Documenting Results
R&S
®
Scope Rider RTH
274User Manual 1326.1578.02 ─ 15
Remote command:
EXPort:WAVeform:SOURce on page 494
EXPort:WAVeform:MULTichannel on page 495
Save History
This function is only available if option R&S RTH-K15 is installed. It includes the wave-
form history in the data export. If acquisition is running, enabling "Save History" stops
the acquisition. History data is always saved in "Compressed CSV" files.
For details, see Chapter 4.7.4, "Exporting History Data", on page 102.
File Format
Selects the format of the export file.
"CSV"
Comma-separated values (CSV) text file, the waveform is stored in a
table. The columns are separated by commas or another delimiter.
For each sample, one line is written. Values are listed in scientific
notation. You can convert the comma-separated text to columns.
"Compressed
CSV"
ZIP file that contains one or more CSV files. This format reduces the
file size.
Remote command:
EXPort:WAVeform:NAME on page 494
Save Waveform / Save Waveform As
Save the waveform data. The functions are available if the instrument is in a waveform
mode ("Scope", "XY", "Mask", "Roll", "Mask").
"Save Wave-
form"
Saves the file in the defined "Directory" using the autonaming pattern.
"Save Wave-
form As"
Opens a file explorer where you can select the directory and enter the
filename.
Remote command:
EXPort:WAVeform:SAVE on page 496
Directory
Defines the directory where the waveform files are stored. If a USB flash drive is con-
nected, the instrument stores the data to this external device by default.
Remote command:
EXPort:WAVeform:NAME on page 494
Filename Base
Defines the first part of the autonaming pattern. The complete filename pattern is:
<filename base>_<date>_<acq time>_<index>.csv|zip.
Remote command:
EXPort:WAVeform:NAME on page 494
Store with Time
Includes horizontal values in the export data (time values).
Waveforms