Instructions

Documenting Results
R&S
®
Scope Rider RTH
272User Manual 1326.1578.02 ─ 15
Load Setting
Opens the specified directory. Tap the file to be loaded.
Save Setting
Saves the settings to the specified directory with a default filename. The filename pat-
tern is: <filename base>_<date>_<time>.xml.
Save Setting As
Opens a file selection dialog. Navigate to the target directory and enter the filename.
Tap "Save" to store the file.
Setting Directory
Sets the directory to which the settings are stored with the "Save Setting" function.
Filename Base
Defines the first part of the filename. The complete filename pattern is:
<filename base>_<date>_<time>.xml.
12.4 Waveforms
Analog channel and math waveforms can be saved in several ways:
●
As reference waveforms for later use on the instrument: "Ref" menu. See: Chap-
ter 4.5, "Reference Waveforms", on page 93
●
In CSV file on a USB flash drive or internal SD card for further analysis using other
applications: [FILE] > "Waveforms". This way is described in the current chapter.
If you want to save many waveforms, you can assign the function to the
key. See:
Chapter 12.6, "Quick Save with OneTouch", on page 279.
12.4.1 Exporting Waveforms to File
The waveform export provides the following possibilities:
●
Store either one waveform or all active waveforms.
●
Include time values.
●
Option R&S RTH-K15: Save history data.
●
Option R&S RTH-B1: Save logic channels.
If a USB flash drive is attached, the file is stored there. Otherwise, the file is stored in
the Export folder on the microSD card.
1. Activate the waveforms that you want to export.
2. Press the [FILE] key.
3. Select "Waveforms".
4. Select the waveforms for export:
Waveforms