Instructions

Data Logging
R&S
®
Scope Rider RTH
164User Manual 1326.1578.02 ─ 15
Remote command:
LOGGer:SLOT:CURRent on page 418
Slot Name
Enter an optional slot name to describe the logged data. The maximum length of the
name is 20 characters.
Remote command:
LOGGer:SLOT:SLOT<m>:NAME on page 418
Load Slot
Loads the stored log data of the selected slot.
Only possible while logging is stopped.
Remote command:
LOGGer:SLOT:LOAD on page 419
LOGGer:SLOT:SLOT<m>:HASData? on page 418
Clear Slot
Deletes the log data of the selected slot.
Only possible while logging is stopped.
Remote command:
LOGGer:SLOT:CLEar on page 419
Clear All Slots
Deletes the log data of all slots.
Only possible while logging is stopped.
Remote command:
LOGGer:ACLR on page 419
8.5 Analyzing Logged Data
You can analyze logged data using the "Cursor" and the "Zoom". To analyze logged
data at a later time, the data is stored automatically, and you can load the stored data
to the display.
8.5.1 Cursor
To analyze logged data, you can use cursor measurements, see also Chapter 4.3,
"Cursor Measurements", on page 87.
Analyzing Logged Data