Information
6
Logic analyzer
Motor drive measurements often require up to four
analog measurement channels with no channel free for
monitoring digital control interfaces. The digital logic
probe (MSO) of the R&S®Scope Rider features eight ad-
ditional digital inputs for analyzing control signals, time-
correlated to the analog channel signals. With 250 MHz
bandwidth, 1.25 Gsample/s sampling rate and configu-
rable thresholds, it adapts to almost any digital interface.
Protocol analyzer
Protocols such as I
2
C or SPI are frequently used for
transferring control messages between integrated
circuits. The R&S®Scope Rider is the first isolated
handheld digital oscilloscope with trigger and decode
capability for in-depth troubleshooting. Triggering on
protocol events or data enables selective acquisition of
relevant events, data and signals.
Data logger
Sporadic sensor signal faults or rare glitches in a power
supply can cause complex system failures without any
obvious indication of the root cause. The long-term
data logger of the R&S®Scope Rider makes it possible to
monitor up to four key measurements at a speed of 1,
2 or 5 measurements per second to uncover such rare
failures. The large memory of 2 Msample per channel
allows more than 23 days of log duration. The statistics
display provides information about minimum and maxi-
mum values with exact time.
Oscilloscope,logicandprotocolanalyzer,data
loggeranddigitalmultimeter:Withthepowerof
five instruments and dedicated operation modes
for XY operation, roll mode and mask testing, the
R&S®Scope Rider provides the capabilities and
the flexibility needed for debugging all kinds of
electronic systems.
Debuggingpower
inyourhand:
five instruments in
one portable design
In the lab
In the lab
RTH_Marketingbrosch_en_3607_0517_62_v0300.indd 6 04.12.15 13:20