User manual

Remote Control Commands
R&S
®
Scope Rider RTH
190User Manual 1326.1578.02 ─ 04
MEASurement<m>:DELay:SLOPe <Slope>
Sets the slope for the delay measurement type.
Suffix:
<m>
.
1..4
Parameters:
<Slope> POSitive | NEGative | EITHer
POSitive
Delay between the first rising edge of each source waveform.
NEGative
Delay between the first falling edge of each source waveform.
EITHer
Delay between the first edge of each source waveform, no mat-
ter if it is rising or falling.
*RST: POSitive
12.4.2.2 Measurement Results
MEASurement<m>:RESult:ACTual?
Returns the result of the indicated measurement.
Suffix:
<m>
.
1..4
Return values:
<Result> Range: -100E+24 to 100E+24
Increment: 100E-12
*RST: 0
Usage: Query only
MEASurement<m>:RESult:LIMit?
Indicates whether the measurement results are inside the measurement range, or out-
side (clipping).
Suffix:
<m>
.
1..4
Return values:
<ResultLimit> INSide | OVERflow | UNDerflow | OVUNflow
*RST: INSide
Usage: Query only
Waveform Analysis