Owner`s manual

4
There are five Divisional pistons for each manual division. The Great and Swell
Divisionals are operated by pistons located under each respective manual. The Divisional
pistons independently affect all stops and MIDI controls on the Great, Swell or Pedal. Each
division's registration may be changed independently by pressing a Divisional piston.
A combination memory must be unlocked to set pistons. Once the pistons are set, the
combination memory may be locked again to prevent accidental change.
 UNLOCKING A COMBINATION MEMORY:
1. Press and hold M1, M2, M3 or M4 located under the Swell manual to the right for
approximately five seconds. “USING INTERNAL MEMORY” appears, followed
by "MEMORY (#) LOCKED".
2. While continuing to hold the memory piston, rotate the Alpha Dial in either
direction until the Console Display reads “MEMORY (#) UNLOCKED.”
3. Release the memory piston. The memory is now unlocked.
 SETTING THE PISTONS:
1. Select a memory by pressing M1, M2, M3 or M4. Note: Pistons cannot be set if
the memory is locked. Please refer to the “Unlocking a Combination Memory”
section above.
2. Select the desired stops.
3. Press and hold the SET piston, located under the Great manual to the far left.
General
Pistons
1-10
General
Pistons
6-10
Great
Divisional
Pistons
1-5
Swell Divisional
Pistons
General
Pistons
1-5
Pedal
Divisional
Pistons
1-5