Owner`s manual

FCC Notice

Radio and Television Interference

Rodgers Parallel Digital Imaging Organs use and generate small amounts of radio-frequency

(RF) energy. The instrument complies with the limits set for Class B computing devices. FCC

Rules, Part 15, Subpart J define the limits for radio and television interference in a residential

installation.

EMC (Electromagnetic Compatibility)

Rodgers Parallel Digital Imaging Organs also comply with the following International EMC

Standards:

Radiated Emissions EN55022 Class B

Conducted Emissions EN55022 Class B

Voltage Fluctuation EN61000-3-3

Harmonics EN61000-3-2

EFT/Burst Immunity EN50082-1

Radiated Immunity EN50082-1

Follow the installation and the use instruction in the manual, or the instrument could potentially

cause interference with some radio or television reception. In the unlikely event this occurs, we

encourage the user to try the following corrective measures:

9 Turn the instrument OFF to see if it is the actual source of the interference.

9 Disconnect the peripheral devices and their input/output cables one at a time. If

the interference stops, it is caused by the peripheral device or its I/O cable.

9 Try coiling and uncoiling the instrument’s power cord in different ways.

9 Connect the instrument’s power cord to a power outlet on a different circuit.

9 Move the instrument further away from the radio or television receiver.

9 Turn the radio or television receiver until the interference stops.

9 Connect the radio or television receiver to a different power circuit.

9 Reorient or move the receiver antenna further away from the instrument.

Consider installing a rooftop antenna with coaxial cable lead-in between the

antenna and receiver.

9 Consult the nearest Rodgers dealer for more information if the above corrective

measures don’t remove the interference.