Owner`s manual

19
Setting up your MX-200
■ When Using the MX-200 Connected to an MR-200
fig.Connect2.e
When Powering the MX-200 from an
MR-200
The MR-200 is equipped with a DC OUT jack for use with
external devices. You can use this to supply power to the
MX-200. This feature allows you to turn on the power to the
MX-200 and the MR-200 simultaneously.
Leave the MX-200’s POWER switch on at all times.
When connecting the devices in this manner, use the 9V/2A
adapter included with the MR-200.
A Rodgers organ is capable of powering only one external
device. It cannot be used to supply power to both the MR-200
and the MX-200. When powering the MR-200 from a Rodgers
organ, do not use the MR-200's DC OUT jack.
AC Adaptor
(included with the MR-200)
MIDI IN
Headphones
Rodgers organ
MX-200
MIDI OUT B
MIDI OUT A MIDI IN
When connecting to an organ that is not
equipped with a Sequencer connector,
connect to the MIDI OUT connector.
MR-200
AC Adaptor
(ACI series
or
PSB-1U)
This headphone jack only allows you to
listen to the tones from the MIDI couplers.
To enjoy the sounds from the entire organ,
use the organ's headphone jack.
←
You can use the DC cable included
with the MR-200 to supply power
from the MR-200 to the MX-200.