Owner`s manual

4
Swell Divisional
Pistons 1 - 5
General
Pistons 1 - 10
General
Pistons 1 - 5
Great Divisional
Pistons 1 - 5
Pedal
Divisional Pistons 1- 5
General
Pistons 6 - 10
Figure 2. Piston Locations
Setting the pistons
1. Select an unlocked memory by pressing M2, M3 or M4.
Note: Memory M1 contains factory settings and is not user accessible.
2. Select the desired stops.
3. Press and hold the SET piston, located under the Great manual to the far left.
4. While holding SET, press the desired combination piston, then release both pistons.