Owner`s manual

2
FEATURES
To get started, here is a tour of the basic operations of the Rodgers 790C:
Turn On/Turn Off
To turn the organ on, press the top part of the rocker switch in the left panel. RODGERS 790C
CLASSIC ORGAN or your personalized greeting appears in the console display. The organ
performs a self diagnostic test of its systems within a few seconds. When completed, the console
display reads TRANSPOSER 0. The Rodgers 790C is ready to play. To turn the power off,
press the lower part of the rocker switch.
Console Division, Combination Memory and Piston Locations
Pedal
Division
Swell
Division
Great
Division
Select
Knob
Alpha
Dial
Console
Display
Crescendo
& Tutti Indicator
General
Cancel
Power
Switch
SET
Piston
Memory Level Pistons
M1, M2, M3, M4
Figure 1. Console Features
Console Display and Menus
The Rodgers 790C is equipped with a two-line console display window located on the right
below the stop rail panel. This display indicates the Transposer setting, and it can also be used to
alter other settings and organist preferences. See Figure 1.
Two controls are used to select and operate the features of the console display. The smaller
knob, located near the console display, is called the Select knob and is used to select different
menu items to be changed. When the console display reads TRANSPOSER 0, this knob controls
the Transposer function. The larger flush dial near the console display is called the Alpha dial
and is used to change a menu setting that has been selected.