Operation Manual

5. TECHNICAL SPECIFICATIONS RODEK R680A2

Rated Power Output (RMS)

All channels driven simultaneously

@ 13.8 V into 4 Ohms (THD<0.1%) 6x97W

Rated Power Output (RMS)

All channels driven simultaneously

@ 13.8 V into 4 Ohms (THD<1%) 6x105W

Rated Power Output (RMS)

All channels driven simultaneously

@ 13.8 V into 2 Ohms (THD<1%) 6x135W

Rated Power Output (RMS)

All channels driven simultaneously

@ 13.8 V into 4 Ohms (THD<1%) 4x100W/1x260W CH5/6 bridged into 4Ohms

Damping Factor @ 4 Ohms Load

All Channels > 200

Signal-to-Noise Ratio (A-Filter Weighted)

All Channels @ full rated power output > 95dB

Frequency Response (-3dB)

Operation Mode set to FULL,

All Channels driven simultaneously 10Hz - 40kHz

Channel Separation

All Channels > 55 dB

Input Sensitivity

All channel Pairs 0.2V - 9V

Integrated Cross-Over/Filtering

Slope Rates 12 dB/Octave High-&Lowpass

Highpass Cross-Over Frequency Range continuously variable 10 - 400 Hz

Lowpass Cross-Over Frequency Range continuously variable 30 - 400 Hz

Fuses 4 x 30 A

Dimensions (W x H x D) 533 x 61 x 265 mm

R680A2 Manual_E+D.indd 26R680A2 Manual_E+D.indd 26 07.07.2004 12:36:47 Uhr07.07.2004 12:36:47 Uhr