Operation Manual

R4100A2 R2180A2 R2100A2 R1500A2

Rated Power Output (RMS)

All channels driven simultaneously

@ 13.8 V into 4 Ohms (THD<0.1%) 4x85W 2x185W 2x105W 1x355W

Rated Power Output (RMS)

All channels driven simultaneously

@ 13.8 V into 4 Ohms (THD<1%) 4x95W 2x190W 2x110W 1x375W

Rated Power Output (RMS)

All channels driven simultaneously

@ 13.8 V into 2 Ohms (THD<1%) 4x140W 2x310W 2x150W 1x555W

Rated Power Output (RMS)

All channels driven simultaneously

@ 13.8 V into 4 Ohms (THD<1%) Bridged 2x280W 1x610W 1x300W n.a.

Damping Factor @ 4 Ohms Load All Channels > 200 > 200 > 200 > 200

Signal-to-Noise Ratio (A-Filter Weighted)

All Channels @ full rated power output > 95dB > 95dB > 95dB > 95dB

Frequency Response (-3dB)

Operation Mode set to FULL,

All Channels driven simultaneously 10Hz - 40kHz 10Hz - 40kHz 10Hz - 40kHz 10Hz - 40kHz

Channel Separation

All Channels > 55dB > 55dB > 55dB > 55dB

Input Sensitivity

All channel Pairs 0.2V - 9V 0.2V - 9V 0.2V - 9V 0.2V - 9V

Integrated Cross-Over/Filtering

Slope Rates 12 dB/Octave High- & Lowpass

Highpass Cross-Over Frequency Range continuously variable 10 - 400 Hz

Lowpass Cross-Over Frequency Range continuously variable 30 - 400 Hz

Fuses 3x25 A 3x25A 2x20A 2x30A

Dimensions (W x H x D) 384 x 59 x 270 mm 405 x 59 x 270 mm 292 x 59 x 270 mm 384 x 59 x 270 mm

5. TECHNICAL SPECIFICATIONS

R1500-4100A2 Manual.indd 30R1500-4100A2 Manual.indd 30 07.07.2004 10:59:13 Uhr07.07.2004 10:59:13 Uhr