PODCAST PRODUCTION STUDIO MULTITRACK GUIDELINES | AUDITION CC | MAC MULTITRACK GUIDELINES | AUDITION CC PODCAST PRODUCTION STUDIO
STEP 1 Create a new Multitrack session by going to File / New / Multitrack Session.
STEP 2 Rename your session and choose save location. Ensure Sample Rate is 48000Hz, Bit Depth is 24 Bit and Master track is Stereo. Click OK, this will open up a few new tracks that we can work with later.
STEP 3 Go to Adobe Audition CC / Preferences / Audio Hardware.
STEP 4 Ensure that Default Input is RODECaster Pro Multichannel, Default Output is RODECaster Pro Stereo, Master Clock Out is RODECaster Pro Stereo and Sample Rate is 48000Hz with an I/O Buffer Size of 1024 Samples.
STEP 5 Create 3 new tracks by going to Multitrack / Tracks / Add Stereo Audio Track. You should now have 9 Audio tracks and a Master track.
STEP 6 View all tracks by going to View / Zoom / Zoom Out Full (All Axes).
STEP 7 Rename Track 1 to “Stereo Mix” by double clicking on the track title.
STEP 8 Zoom into your tracks by mousing over the track bar and rolling your mouse wheel in.
STEP 9 Rename Track 2 to “Mic 1” by double clicking the track name.
STEP 10 Rename Track 3 to “Mic 2” by double clicking the track name.
STEP 11 Rename Track 4 to “Mic 3” by double clicking the track name. Then click on the Input section for this track and select Mono / [05M] RODECaster Pro Multichannel: Mic 3.
STEP 12 Rename Track 5 to “Mic 4” by double clicking the track name. Then click on the Input section for this track and select Mono / [06M] RODECaster Pro Multichannel: Mic 4.
STEP 13 Rename Track 6 to “USB” by double clicking the track name. Then click on the Input section for this track and select Stereo / [07S] RODECaster Pro Multichannel: USB Left.
STEP 14 Rename Track 7 to “TRRS” by double clicking the track name. Then click on the Input section for this track and select Stereo / [09S] RODECaster Pro Multichannel: TRRS Left.
STEP 15 Rename Track 8 to “Bluetooth” by double clicking the track name. Then click on the Input section for this track and select Stereo / [11S] RODECaster Pro Multichannel: Bluetooth Left.
STEP 16 Rename Track 9 to “Sound Pads” by double clicking the track name. Then click on the Input section for this track and select Stereo / [13S] RODECaster Pro Multichannel: Sounds Left.
STEP 17 Record enable each track by clicking on the R until it is lit red.
STEP 18 Hit Record! MULTITRACK GUIDELINES | AUDITION CC PODCAST PRODUCTION STUDIO
