Data Sheet

ACOUSTICS & ELECTRICAL SPECIFICATIONS
The NTG5 is a short shotgun mic designed for the most demanding
recording applications. Tailored frequency response, tight polar
pattern and smooth off-axis response deliver superb audio.
Lightweight aluminium construction makes it perfect for location
recording with a boom pole, and RF-bias circuitry and conformal
coating ensure high resistance to adverse environmental conditions.
Acoustic Principle: RF-bias condenser
Active Electronics: RF-bias demodulation
Polar Pattern: Supercardioid shotgun
Frequency Range: 20 Hz – 20 kHz
Frequency Response: 80 Hz - 20 kHz ±3 dB
Output Impedance: 25 Ω
Signal to Noise Ratio: 84 dB
Equivalent Noise: 10 dB SPL (A-weighted, as
per IEC651)
Input SPL @ 1%THD: 130 dB SPL (1kHz @ 1% THD,
600 Ω load)
Power Requirements: 2 mA @ 48V phantom power
Sensitivity: -23.5 dB re. 1 Volt/Pascal or
Better (66 mV @ 94 dB SPL
@ 1 kHz)
Dimensions (LxWxH):
NTG5
PG2-R
203 x 19
117 x 60 x 240
Weight:
NTG5
PG2-R
76g
224g
POLAR PATTERN FREQUENCY RESPONSE
203 mm 240 mm
117 mm19 mm
• Broadcast-grade short shotgun microphone
• Tailored low frequency response
• Highly directional
• Resistant to adverse conditions and RF interference
• Ultra lightweight – just 76g
• Innovative acoustic design
NTG5 PG2-R
2 kHz
4 kHz
8 kHz
16 kHz
125 Hz
250 Hz
1000 Hz
15
12
9
6
3
0
-3
-6
-9
-12
-15
20 100 1000 10,000
BROADCAST
QUALITY
FLAT FREQUENCY
RESPONSE
HIGHLY
DIRECTIONAL
INTERFERENCE
RESISTANT
EXTREMELY
LIGHTWEIGHT