Specification Sheet

NT1
AUSTRALIA
107 Carnarvon st, Silverwater NSW 2128 Australia
Ph: [phone] Fx: [phone]
USA
PO Box 91028, Long Beach CA 90809-1028
Ph: [phone] Fax: [phone]
Specifications
Features
Incredibly Quiet 1” Cardioid Condenser Microphone
Frequency ResponsePolar Pattern
• Large capsule (1”) with gold-plated membrane
• Cardioid polar pattern
• Internal Rycote® Lyre® based capsule shock mounting
system
• Ultra-low noise transformerless circuitry
• State-of-the-art surface mount electronics
• Heavy-dutymatteblacknish
• Gold plated output connectors
• Designed & manufactured in Australia
• Available with RM2 mount (NT1-SINGLE) or with SMR
shock mount (NT1-KIT)
• Free 10 year extended warranty when you register
online at www.rodemic.com/warranty
187
50
Acoustic Principle Pressure Gradient
Active Electronics
JFET impedance converter
with bipolar output buffer
Directional Pattern Cardioid
Frequency Range 20Hz ~ 20kHz
Output Impedence 100Ω
Equivalent Noise 4.5 dBA SPL (as per IEC651)
Maximum Output
+8 dBu (1kHz, 1% THD into 1K
Ωload)
Sensitivity
-29 dB re 1V/Pa
(35mV @ 94dB SPL)
± 2dB @ 1kHz
Dynamic Range 128 dB SPL
Maximum SPL 132 dB SPL
Signal / Noise 90 dBA SPL (as per IEC651)
Power Requirements
24V phantom power
48V phantom power
Output Connection
3 Pin XLR
Balanced output between pin
2 (+), pin 3 (-) and pin 1 (ground)
Net Weight 395g
0˚
90˚ 270˚
180˚
-2.0
-20.0
-10.0
0.0
-2.0
-4.0
-6.0
-8.0
-10.0
-12.0
-14.0
-16.0
-18.0
-20.0
-22.0
-24.0
-25.0
dB rel. 1V/Pa
+5.0
Frequency:
500 Hz:
1000 Hz:
4000 Hz:
8000 Hz:
14000 Hz: