User Guide

32-BIT FLOAT GUIDE | CUBASE 12 (MAC)
If your audio clipped while recording, rather
than having to re-record the track, you can
simply adjust it afterwards to the appropriate
level. This is the key benefit of 32-bit float
recording. To do this, click the ‘Arrow’ tool
at the top of the screen and then click-and-
drag the box in the centre of your recording
to lower its volume until the peaks sit below
the upper limit of the track, restoring the
previously ‘clipped’ audio.
NOTE: This post-recording gain adjustment
can also be applied to tracks that are too
quiet by following the same process.
STEP 8