Manual

- 12 -
Mounting the M3
A stand mount clip (RM3) is included with your M3 and
should be used to connect the M3 firmly and safely to
a stable microphone stand.
How to attach the stand mount
1. Before placing the M3 into the RM3 stand mount,
remove all cables and connectors to eliminate the
possibility of damaging the connectors.
2. Place the M3 into the RM3 by inserting the mic on
an angle (figures 8 & 9).
Figure 8 - Microphone mounting
Figure 9 - Microphone mounting
Youwillnoticetheholderisquiterm.Thisisintended
to stop the mic from coming loose. Ensure you leave
the On/Off Filter switch facing upwards to enable
better access while in its mount.