Datasheet

AUSTRALIA
107 Carnarvon st, Silverwater NSW 2128 Australia
Ph: [phone] Fx: [phone]
USA
PO Box 91028, Long Beach CA 90809-1028
Ph: [phone] Fax: [phone]
Directional Condenser Microphone
NTG4
SpecificationsFeatures
• Broadcast sound quality
• Low noise circuitry
• Condenser transducer
• Rugged metal construction
• On-board Power Button and LED
• High Frequency Boost Button
• High Pass Filter Button (Flat/75Hz)
• PAD Button (-10db)
• Low handling noise
• Designed and manufactured in
Australia
• Full 10 year warranty with online
registration
Acoustic Principle
Line Gradient
Directional Pattern
Super-Cardioid
Frequency Range
20Hz ~ 20,000Hz
(selectable HPF @ 75Hz)
Sensitivity
-32dB re 1V/Pa (25mV @
94db SPL) ±2dB @ 1kHz.
Output Impedance
200Ω
Equivalent Noise
16dBA SPL (per IEC651)
Maximum Output
7dBu
(@ 1kHz, 1% THD into 1kΩ)
Dynamic Range
119dB (per IEC651)
Maximum SPL
135dB
Signal to Noise Ratio
78dB SPL (per IEC651)
Power Req.
48V, 24V, 12V Phantom
Power (4.5mA current
draw)
Output Connection
3 pin XLR, balanced output
between Pin 2 (+), Pin 3 (-)
and Pin 1 (ground)
Dimensions 22 x 225mm
Net Weight 126g
0˚
90˚ 270˚
180˚
-2.0
-20.0
-10.0
0.0
-2.0
-4.0
-6.0
-8.0
-10.0
-12.0
-14.0
-16.0
-18.0
-20.0
-22.0
-24.0
-25.0
dB rel. 1V/Pa
+5.0
Frequency:
16000 Hz:
4000 Hz:
250 Hz:
1000 Hz:
Polar pattern
Incl. accessories
• RM5 Mic Clip
• Foam Windshield
• ZP1 Pouch
Frequency response
22
225
FLAT
HIGH BOOST
HIGH PASS