User manual

QUICK INSTALLATION
How to Connect the Interface Cables - Connecting the Drive
1. Turn ON your computer and wait until it fully boots up to load all programs.
2. Using only one interface cable at a time, select the interface port you wish to use on your
computer. When using FireWire, connect one end of the FireWire cable to the appropriate
FireWire port) of your computer and then the other end to the FireWire port in the Lancer.
When using USB, connect one ends of the USB cable to the USB ports of your computer (or
via Power Hub that is connected to your computer) and then the other end to the USB port
in the Lancer. Upon connection, the light on the Lancer drive will turn ON.
3. The Hard drive is preformatted for Plug-and-Play operation. After a few seconds a Rocstor
HD icon will show on “My Computer” folder under the Windows OS. Under the Mac OS,
the Rocstor HD icon will appear on the “Desktop.”
4. Click (double click) on the Rocstor HD icon to access the drive.
ROCSTOR | LANCER LX user manual Page | 9