User manual

ROCSECURE – Rocsafe MX User Manual
12
Connecting Rocsafe MX to a computer
Once your hard drive is installed in Rocsafe MX, you are ready to use it with your computer. To do so, follow these
easy steps:
1. Insert the USB or Firewire 400/800 connector to
your computer’s corresponding port.
2. Insert the USB or Firewire 400/800 to Rocsafe MX’s
corresponding port. Ensure correct connector
orientation to obtain a snug fit.
3. The unit’s backlight will turn on, indicating that
Rocsafe MX has powered up.