User manual

ESATA PCI EXPRESS CARD INSTALLATION
Complete the steps provided in this section to install the eSATA PCI Express Card to use with
the RAID System. The eSATA PCI Express Card provides a host computer with two Windows and
Mac compatible eSATA ports.
System Requirements Windows 2000 or later 32-bit/64-bit OS
• Mac OS 10.4.x or later
• An available PCI-Express slot
• CD-ROM or DVD-ROM drive
Hardware Installation
1. Power “off” and unplug your computer.
2. Remove the housing of your computer and locate an available PCI-Express slot on your
motherboard.
3. Insert the card in the available PCI-Express slot. Ensure that the card is firmly seated in the
slot.
4. Replace the housing of your computer.
Driver Installation
Follow the provided prompts to complete the driver installation.
In the Windows system, the “Add New Hardware Wizard” will open automatically. Insert the
installation CD included in the package, navigate to and open the installation file.
For Mac OS, insert the installation CD and locate the Mac driver installation file. Follow the
provided prompts to complete the driver installation.
Screw
PCI-Express
Card
Mounting
Bracket
System
Frame
BIGROC 5C – 4Bay RAID - 1U Rack Mount System - User Manual Page | 30