Issue 1.
Issue 1.00 Doortello Home User guide Contents Description ................................................................................................................................................... 3 Package content ........................................................................................................................................... 3 Introduction ..................................................................................................................................
Issue 1.00 Doortello Home User guide Introduction The Doortello Home is a door phone system for integration with new or existing telephone systems. The door phone has a analogue telephone line interface and can be connected to any type of transmission technology, as far as a specific adapter is available, like ISDN, VoIP, GSM, DECT and similar systems. Pressing a chime button a programmed telephone number is sent as DTMF tones to the telephone line. Up to 6 chime buttons can be connected to the system.
Issue 1.00 LED Doortello Home loudspeaker chime button 2 chime button 1 User guide connector for expansion modules connections volume control Door phone DH 02. Front and rear view. Features - Up to 6 chime buttons (dry contacts) can be connected. For each button a 1 to 16 digits long telephone number (1-0,*,#, flash, pause) can be stored.
Issue 1.00 Doortello Home User guide Installation Before you start with the installation please read the following indications: - The Doortello Home can, together with his modular door station program, has a IP 32 protection degree and can be installed also outside. - If you plan an installation in a rainy environment we suggest the use of a weather shelter or a surface mounting box with weather shelter (IP 33).
Issue 1.00 Doortello Home User guide Connections power supply (A/-) driver contact 2 (D2/D2') driver contact 1 (D1/D1') telephone line (T/T') A - D2 D2' D1D1' T T' C P4 P3 P2 P1 chime button 3 (P1) chime button 4 (P2) chime button 5 (P3) chime button 6 (P4) common wire for chime buttons 3 to 6 Connections Doortello Home basic bunit External power supply (A/-) The external power supply is used to power the door phone and other features.
Issue 1.00 Doortello Home User guide Driver contacts 1 and 2 (D1/D1'; D2/D2') The driver contacts can be used to open doors or other functions like the activation of a video camera. As default the first driver contact is activated pressing the DTMF digit „7“ during the conversation, and the second driver contact with the digit „8“. Other ways to work are possible, like the automatic activation with line seizure. Also the activation codes can be programmed, i.e.
Issue 1.00 Doortello Home User guide Impedance 600 Ohm (default) Impedance Zr Jumpers for line impedance adaptation Automatic heating element If the device has an automatic integrated heating element. This is used to ensure a correct functionality with outside temperature down to - 20°C. The heating element is activated automatically at +10°C and will be deactivated at +20°C. First activation Install and configure the door station as you wish.
Issue 1.00 Doortello Home User guide Programmation The entire programmation, like storing the telephone numbers or the selection of the different operating modalities, is done using a telephone with DTMF dial capability. Please note! The device has two memories. A RAM and a flash memory. During the programmation the unit will transfer all the data from the flash to RAM memory. At the end of the programmation the data are transferred again back to the flash.
Issue 1.00 Doortello Home User guide To terminate the programming mode dial 3. Please note! If you terminate the call hanging up the handset without dialling the digit 3 all the data inserted up to this time will be lost! Please note! It may be that the programming mode activation using a password has been deactivated with a previous programmation. Is this case the programming mode is activated just after the input of the *#0 digits. Please note! The password could has been changed.
Issue 1.00 Doortello Home User guide Please take care that the default data load will delete all programmed telephone numbers and values. If you want to delete or change just one telephone number is the default data reload not very useful. Use instead the procedure described in the chapter Delete telephone number. Please note! The above indicated procedure considers that the password has his standard value 1234. If the password was changed you have to use the new password instead of 1234.
Issue 1.00 Doortello Home User guide duration (is considered as 1 digit); Examples: The chime button 1 must dial the number 13. As your PBX has an automatic trunk selection feature activated you must dial a flash to switch from external to internal dial. To ensure the correct dial after the flash a pause has to be inserted. Programmation: n *#1 OK tone ##4##312**1 OK tone This number will use 4 of the 16 available digits. Delete telephone number Each chime button can be deleted one by one.
Issue 1.00 Doortello Home User guide reprogrammed only from factory. Loudspeaker status after line seizure With the Doortello Home it is possible to define which status the loudspeaker has to have after the line seizure. You can define if it has to be on or off. Form factory the loudspeaker is always on, but you can modify this, i.e. if you don’t want to hear the dial and call progress tones.
Issue 1.00 Doortello Home User guide only after the called party answers the call. Input: *#3 OK tone #23 OK tone Microphone status after line seizure With the Doortello Home it is possible to define which status the micorphone has to have after the line seizure. You can define if it has to be on or off. Form factory the microphone is always off, but can modify this. You can choices between 5 different operating methods: Microphone always on 1 The microphone is on as soon you press a button.
Issue 1.00 Doortello Home User guide Automatic hang up after driver contact activation The Doortello Home will, from factory, hang up as soon as a driver contact is activated. This function can be deactivated, i.e. if you want to activate more time the driver contact during a conversation.
Issue 1.00 Doortello Home User guide *#4 OK tone #3 {activation code} ** {driver contact no.} OK tone As activation code the values from 7 to 9999 can be programmed. If you program the value 0 the driver contact will be deactivated. As driver contact no. the value 1 (driver contact 1) and 2 (driver contact 2) can be used. Example: You want to program that the driver contact 2 should be activated using the code "702".
Issue 1.00 Doortello Home User guide ensured only by this timer. This security will be lost if you deactivate this feature. If you have connection error it can happen that the device will be blocked on the line. In this case you need to separate the telephone line and the power supply to reset the device. Please note! Connection time below 30 seconds will not be accepted as then a reprogramming of the device is no more possible.
Issue 1.00 Doortello Home User guide Driver contacts activation time The driver contacts can be activated for a programmed time. As default the activation time for all contacts is set to 5 seconds. Also the contacts can be programmed to be automatically activated for all the duration of the conversation. To modify the activation time of the driver contact please follow this procedure: *#7 OK tone #4 {Activation time in s} ** {Driver contact no.} OK tone Values from 01 to 98 can be programmed.
Issue 1.00 Doortello Home User guide special busy tone 220/220. If needed, you can reprogram the tones. To reprogram a busy tone please follow this procedure: *#8 OK tone #1 {make busy tone 1 in ms x 10} OK tone {break busy tone 1 in ms x 10} OK tone {No. of busy tone to be detected before hang up} OK tone *#8 OK one #2 {make busy tone 2 in ms x 10} OK tone {break busy tone 2 in ms x 10} OK tone {No.
Issue 1.00 Doortello Home User guide *#8 OK tone #4025 OK tone 050 OK tone 025 OK tone 400 OK tone Please note! If you want to program a ring back tone with a single make and break you have to use only the values make 1 and break 2. The values break 1 and make 2 have to have in this case a value of 000. Number of rings If the unit calls a telephone which doesn’t answer within a programmed number of calls the connection will be automatically disconnected.
Issue 1.00 Doortello Home User guide Values from 01 to 30 can be used. Example: n You want to load the tone table 11 (Panasonic PBX).
Issue 1.
Issue 1.00 Doortello Home User guide How to use The following use description is based on the default functionality. The described procedure may change if the device has been reprogrammed. Calling a phone using a chime button Press the chime button at the doorstation. The red LED will flash and the stored number will be dialled. When the called party answers the call the red LED will go steady on and you can now talk to the called party.
Issue 1.
Issue 1.00 Doortello Home User guide Trouble shooting The door phone can not be programmed 1. Check if you are using the right password. 2. Check if the automatic answer feature was deactivated. In this case you have to answer the call manually at the door phone. 3. The DTMF tones your system is sending may have a too high level. Try to program the device using an incoming external call. The door phone does not dial 1. Check if a telephone line is connected to the device. 2.
Issue 1.00 Doortello Home User guide Technical data External power supply: 8 to 12 Vrms (MAXIMUM), max. 150 mA Power consumption on telephone line: ca. 15 µA (standby) 18-60 mA (nominal) Optical indicators: One red LED Speakerphone: Speech driven half-duplex speakerphone, manual switching speakerphone Dial: DTMF DTMF tone detection: min.
Issue 1.00 Doortello Home User guide Programming codes overview Following an overview of all the programming code used to configure the Doortello Business unit. In the right column (DEFAULT) you can read the information about the factory default data programmed for the related code. (T: you will hear a tone). Nr. Programming code Function 1. *#0TT Programming mode activation 1234 2. *#9T#9T Factory d efault data load 1234 3. *#1T**
Issue 1.00 Doortello Home Nr. Programming code 17. *#8T#4TT TTT User guide Function D EFAULT see d escrip tion Ring b ack tone detection 18. *#8T#5T Max. no. of calls 7 19. *#8T#9T Tone table load 01 Overview of programmed values Key Telephone no.
Issue 1.
Issue 1.
Issue 1.00 Doortello Home User guide This symbol indicates that this electric device has to be collected separatly and not disposed with the normal home waste. The european union has arranged a collect and recycling system where the manufacturer are responsible for the disposal of this equipment. This devices has been manufactured using high-quality and recycleable materials and components.
© 2009 ROCOM GmbH. Product may change without notice. We do not respond for any errors or mistake in the present documentation. Printed in Germany. Issue 1.00 Doortello Home User guide Your dealer: Energie- und Kommunikationssysteme GmbH Lessing Str. 20, 63110 Rodgau, Deutschland Tel. +49- (0) 6106 - 6600-0 Fax +49-(0) 6106 - 6600-66 HOTLINE +49-(0)6106-646041 E-Mail: info@rocom-gmbh.de http://www.rocom-gmbh.