Datasheet

ManualsBrandsRocol ManualsAnti-Slip MattingAnti-slip tape black (L x W) 18.25 m x 100 mm Black

Technical Data

SAFE STEP

Standard Tapes and Treads

Part Code: Pack Size:

43530 25mm x 18.25m rolls

43531 50mm x 18.25m rolls

43532 100mm x 18.25m rolls

43533 150mm x 18.25m rolls

43534 & 5 150 x 600mm treads

Description

SAFE STEP

Standard Tapes and Treads comprise of a mineral coated plastic film treated on one

side with a pressure sensitive adhesive, protected by a removable liner.

SAFE STEP

Standard Tapes and Treads provide a hard wearing, slip resistant surface, for

application to concrete, masonry, wood, ceramic tiles and metal etc., both inside and out.

Features

• Quick and easy to apply.

• Capable of withstanding temperature extremes.

• Durable (next to diamond hard) anti–slip surface.

• Available in various widths.

• Good resistance to water, motor oil, detergents, solvents and UV light.

• Available in ‘fade resistant’ black.

Technical Data (Typical)

Colour: Black

Mineral Particles:

Particle Size:

Hardness:

Silicone carbide

180-300 microns

Mohs scale 9

Bonding Medium: Copolymer adhesive

Weight of Product:

800-850 g/sq.mtr

Break Strength (ASTM D882): 6500 lbs/sq inch

26 lbs/sq inch of width

Shear Resistance (PSTCTM): 2 lbs/sq inch after 500+ hours

Removal of Film: Maximum 164 N/m

Adhesive Thickness: 100+ 10 microns

No of Pages

Issue No 06

Date 5/13

Ref SSSASRTD

Summary of content (4 pages)

PAGE 1
Technical Data SAFE STEP® Standard Tapes and Treads Part Code: Pack Size: 43530 43531 43532 43533 43534 & 5 25mm x 18.25m rolls 50mm x 18.25m rolls 100mm x 18.25m rolls 150mm x 18.25m rolls 150 x 600mm treads Description SAFE STEP® Standard Tapes and Treads comprise of a mineral coated plastic film treated on one side with a pressure sensitive adhesive, protected by a removable liner.
PAGE 2
Technical Data Application Temperature: Above 5°C (Air & Surface) Heat Resistance: -20 to 90°C Chemical Resistance: (Incidental Contact) Good resistance to water, motor oil, hydraulic fluid, detergent, petrol, diesel Pendulum slip Resistance using TRRL rubber (BS7976) Dry Pendulum Test Values (PTV) Wet Pendulum Test Values (PTV) Oily Pendulum Test Values (PTV) Slip potential Slipclassification potential classification 89 94 (Low slip potential)* (Low slip potential)* 45 80 (Low slip potential)* (Low
PAGE 3
Technical Data Laying - remove the backing paper and accurately position the adhesive surface. Start laying at one end and using firm pressure work towards the other end, without trapping air bubbles. A hard rubber or wooden roller may be of assistance. Should there be any trapped air bubbles, these can be punctured and pressed down. Once the SAFE STEP® Tapes and Treads are in place, they are immediately ready for use.
PAGE 4
Technical Data Coverage Rates (Typical) Strong Bond Edge Sealer 2.5m2 per 500ml tin 10m per 100ml tube For further information on the Strong Bond and Edge Sealer products refer to separate technical data sheets. Surface Maintenance It is essential that SAFE STEP® Tapes and Treads are cleaned regularly to maximise the anti-slip performance. Under normal conditions periodically sweeping with a stiff brush is all that should be required.