User`s manual

AT Command Reference Manual
3-44 1048
2. The DTE speed is 19200 bps and the modem has been instructed to report the DTE speed to the DTE upon connecting.
CONNECT 38400 (17)
For X1, X2, X3, and X4, the modem sends this result code upon connecting when the DTE speed is 38400 bps and the
modem has been instructed to report the DTE speed to the DTE upon connecting.
CONNECT 57600 (18)
For X1, X2, X3, and X4, the modem sends this result code upon connecting when the DTE speed is 57600 bps and the
modem has been instructed to report the DTE speed to the DTE upon connecting.
CONNECT 115200 (19)
For X1, X2, X3, and X4, the modem sends this result code upon connecting when the DTE speed is 115200 bps and the
modem has been instructed to report the DTE speed to the DTE upon connecting.
CONNECT 75TX/1200RX (22)
For X1, X2, X3, and X4, the modem returns this result code upon establishing a V.23 originate connection when the modem
has been instructed to report the DCE speed upon connection.
CONNECT 1200TX/75RX (23)
For X1, X2, X3, and X4, the modem returns this result code upon establishing a V.23 answer connection when the modem
has been instructed to report the DCE speed upon connection.
DELAYED (24)
For X4, the modem returns this result code when a call fails to connect and the number dialed is considered 'delayed' due to
country blacklisting requirements.
BLACKLISTED (32)
For X4, the modem returns this result code when a call fails to connect and the number dialed is considered 'blacklisted'.
FAX (33)
The modem returns this result code when a fax modem connection is established in a facsimile mode.
DATA (35)
The modem returns this result code when a data modem connection is established in a facsimile mode.
CARRIER 300 (40)
The modem returns this result code when a 0-300 bps data rate has been detected on the line and carrier reporting has
been enabled. (See S95 and Xn.)
CARRIER 1200/75 (44)
The modem sends this result code when the V.23 backward channel carrier has been detected on the line and carrier
reporting has been enabled. (See S95 and Xn.)
CARRIER 75/1200 (45)
The modem sends this result code when the V.23 forward channel carrier has been detected on the line and carrier reporting
has been enabled. (See S95 and Xn.)
CARRIER 1200 (46)
The modem sends this result code when a 1200 bps data rate has been detected on the line and carrier reporting has been
enabled. (See S95 and Xn.)
CARRIER 2400 (47)
The modem sends this result code when a 2400 bps data rate has been detected on the line and carrier reporting has been
enabled. (See S95 and Xn.)
CARRIER 4800 (48)
The modem sends this result code when a 4800 bps data rate has been detected on the line and carrier reporting has been
enabled. (See S95 and Xn.)