User`s manual

AT Command Reference Manual
1048 8-5
8.3 MNP 10 COMMANDS
-K0 Disable MNP 10 extended services.
-K1 Enable MNP 10 extended services.
-K2 Enable MNP 10 extended services detection only.
-SEC=0 Disable MNP10-EC.
-SEC=1,[<tx level>] Enable MNP10-EC and set transmit level <tx level> 0 to 30 (0 dBm to -30 dBm).
8.4 W-CLASS COMMANDS
*B Display list of permanently blacklisted numbers.
*D Display list of delayed numbers.
*NCn Change country to one of eight in NVRAM.
8.5 CALLER ID COMMANDS
#CID=0 Disable Caller ID.
#CID=1 Enable Caller ID with formatted presentation.
#CID=2 Enable Caller ID with unformatted presentation.
8.6 FAX CLASS 1
+FCLASS=n Service class.
+FAE=n Data/fax auto answer
+FRH=n Receive data with HDLC framing.
+FRM=n Receive data.
+FRS=n Receive silence.
+FTH=n Transmit data with HDLC framing.
+FTM=n Transmit data.
+FTS=n Stop transmission and wait.