User`s manual

Command Reference Manual
1199 3-7
3.2.1.11 +GCI - Country of Installation
This extended syntax command selects and indicates the country of installation for the modem. This parameter selects the
settings for any operational parameters that need to be adjusted for national regulations or telephone networks.
Syntax
+GCI=<country_code>
Defined Values
<country_code> 8-bit country code from Annex A of T.35. The value is the hexadecimal equivalent of the T.35
code, with bit 8 treated as the most significant bit and bit 1 treated as the least significant bit.
The supported countries are:
Country Code Country Code Country Code
Australia 09 Hungary 51 Poland 8A
Austria 0A India 53 Portugal 8B
Belgium 0F Ireland 57 Russia B8
Bulgaria 1B Israel 58 Singapore 9C
Canada 20 Italy 59 Spain A0
China 26 Japan 00 Sweden A5
Czech and Slavak
Federal Republic
2E Korea 61 Switzerland A6
Denmark 31 Luxembourg 69 Taiwan FE
Finland 3C Mexico 73 United Kingdom B4
France 3D Netherlands 7B United States B5
Germany 42 New Zealand 7E
Greece 46 Norway 82
Hong Kong 50 Philippines 89
Default
If the modem is specified for use in only one country, that country code is the default. Otherwise, the default is defined by the
OEM.
Reporting Current or Selected Values
Command: +GCI?
Response: +GCI: <current country_code>
Example: +GCI: 3D indicates that the modem is set for France.
Reporting Supported Range of Parameter Values
Command: +GCI=?
Response: +GCI: (<country_code>[,<country_code>[,<country_code].......]]
Example: +GCI: (20,73,B5) The modem can be set for Canada, Mexico or the United States.