User`s manual
Command Reference Manual
3-6 1199
3.2.1.7
+GMI - Request Manufacturer Identification
This command causes the modem to report the modem product manufacturer.
Syntax
+GMI
Typical Response
+GMI: ROCKWELL
OK
3.2.1.8
+GMM - Request Model Identification
This command causes the modem to report the modem product.
Syntax
+GMM
Typical Response
+GMM: V90
3.2.1.9
+GMR - Request Revision Identification
This command causes the modem to report the modem version, revision level or date. This is the same as the I3 command.
Syntax
+GMR
Typical Response
+GMR: V3.001-V90_2M_DLS
OK
3.2.1.10
+GCAP - Request Complete Capabilities List
This extended-format command causes the modem to transmit one or more lines of information text listing additional
capabilities command +<name>s , which is intended to permit the user to identify the overall capabilities of the modem. In
particular, if the modem implements a particular modem control standard that uses Extended Syntax Commands, and if that
modem control standard includes command(s) that indicate general capabilities, the +<names>(s) of those commands will be
reported to the modem in response to a +GCAP command.
Syntax
+GCAP
Example Responses
+GCAP: +FCLASS, +MS, +ES, +DS, for a data modem that supports all capabilities listed
Where:
+FCLASS T.class1, +F (Class 1 Facsimile modem Control)
+MS +M commands (Modulation Control: +MS and +MR commands)
+ES +E commands (Error Control: +ES, +EB, +ER, +EFCS, +ETBM)
+DS +D commands (Data Compression: +DS and +DR)