User`s manual

Command Reference Manual
3-2 1199
3.2.1.2 +FCLASS - Select Active Service Class
This command selects the active service class (mode).
Syntax
+FCLASS=<mode>
Defined Values
<mode> Decimal number which corresponds to the selected service class.
0 Select Data Mode (see Section 3) (Default.)
1 Select Facsimile Class 1 Mode (see Section 4)
1.0 Select Facsimile Class 1.0 Mode (see Section 4)
2 Select Facsimile Class 2 Mode (see Section 5)
8 Select Voice Mode (see Section 6)
80 Select VoiceView Mode (see Section 6)
Result Codes
OK For <mode> = 0, 1, 1.0, 2, 8, and 80.
ERROR Otherwise.
Reporting Current or Selected Values
Command: +FCLASS?
Response: +FCLASS: <mode>
Example: +FCLASS: 0 For the default setting.
Reporting Supported Range of Parameter Values
Command: +FCLASS=?
Response: +FCLASS: (<mode> range)
Example: +FCLASS: (0,1,1.0,2,8,80)
3.2.1.3 +VCID - Caller ID (CID)
This command controls the reporting and presentation of data associated with the Caller ID services in the Incoming Call Line
ID (ICLID) data format.
Syntax
+VCID=<pmode>
Defined Values
<pmode> Decimal number corresponding to the selected option.
0 Disable Caller ID reporting. (Default).
1 Enables Caller ID with formatted presentation to the DTE. The modem will present
the data items in a <Tag><Value> pair format. The expected pairs are date, time,
name, and caller code (telephone number),
2 Enables Caller ID with unformatted presentation to the DTE.
Reporting Current or Selected Values
Command: +VCID?
Response: +VCID: <pmode>
Example: +VCID: 0 For the default setting.
Reporting Supported Range of Parameter Values
Command: +VCID=?
Response: +VCID: (<pmode> range)
Example: +VCID: (0-2)