User`s manual

Command Reference Manual
6-20 1199
6.2.3 Speakerphone Commands
6.2.3.1 +VSP - Speakerphone ON/OFF
This command turns the speakerphone ON or OFF
Syntax
+VSP=<mode>
Defined Values
<mode> Decimal number corresponding to the selected option.
0 The speakerphone function is OFF. (Default.)
1 The speakerphone function is ON.
Reporting Current or Selected Values
Command: +VSP?
Response: <mode>
Example: 0 For the default setting.
Reporting Supported Range of Parameter Values
Command: +VSP=?
Response: (<mode> range)
Example: (0,1)
Result Codes
OK <mode> = 0 or 1.
ERROR Otherwise. or if not in Voice Mode.
6.2.3.2 +VDX - Speakerphone Duplex Mode
This command selects speakerphone full duplex mode.
Syntax
+VDX=<mode>
Defined Values
<mode> Decimal number corresponding to the selected option.
1 The speakerphone mode is full duplex.
Reporting Current or Selected Values
Command: +VDX?
Response: <mode>
Example: 1 For the default setting.
Reporting Supported Range of Parameter Values
Command: +VDX=?
Response: (<mode> range)
Example: (1)
Result Codes
OK <mode> = 1.
ERROR Otherwise. or if not in Voice Mode.