User`s manual

Command Reference Manual
1199 1-1
1. INTRODUCTION
1.1 OVERVIEW
This manual describes the host command and responses for the following Rockwell modem families:
RC56D/RC336D Modem Device Set
RC56LD/RC336LD Modem Device Set
The commands and responses are implemented in controller firmware for specific modem models. Additional configuration
and implementation information is available in release notes and/or readme files that accompany product firmware release.
The descriptions in this manual apply to all commands and parameters that may be supported by different modem models.
Refer to Modem Firmware Release notes for commands applicable to specific modem models.
This manual supersedes the following manual only for the modem families stated above and for firmware issue V3.X or later.
Commands for RCVDL56ACF, RCVDL56ACFL/SP, RC56D/RC336D, RC56LD/RC336LD Modems (Order No. 1131)
1.1.1 Command Syntax
The fundamental DTE interface command syntax is described in Section 2.
1.1.2 Command Descriptions
These commands are grouped into the following categories:
Syntax and procedures Section 2
Data commands Section 3
Fax Class 1 and Fax Class 1.0 commands Section 5
Fax Class 2 commands Section 6
Voice/Audio commands Section 7