Specifications

UC864-E/G AT Commands Reference Guide

80304ST10041a Rev. 3 - 18/07/08

+CALA - Alarm Management

otherwise it remains fully operative. In both cases the MODULE sets

High the RI output pin. The RI output pin remains High until next

#WAKE issue or until a 90s timer expires. If the device is in "alarm

mode" and it does not receive the #WAKE command within 90s. After

that it shuts down.

<text> - unsolicited alarm code text string. It has meaning only if <type> is

equal to 2 or 5 or 6.

<recurr> - string type value indicating day of week for the alarm in one of

the following formats:

“<1..7>[,<1..7>[, … ]]” - it sets a recurrent alarm for one or more days in

the week; the digits 1 to 7 corresponds to the days in the week

(Monday is 1).

“0” - it sets a recurrent alarm for all days in the week.

<silent> - integer type indicating if the alarm is silent or not.

0 - the alarm will not be silent;

1 - the alarm will be silent.

Note: a special form of the Set command, +CALA=””, deletes an alarm in

the ME

Note: The "alarm mode" is indicated by hardware pin CTS to the ON status

and DSR to the OFF status, while the "power saving" status is indicated by

a CTS - OFF ,DSR - OFF and USB_VBUS – OFF status. The normal

operating status is indicated by DSR – ON or USB_VBUS – ON status.

During the "alarm mode" the device will not make any network scan and will

not register to any network and therefore is not able to dial or receive any

call or SMS, the only commands that can be issued to the MODULE in this

state are the #WAKE and #SHDN, every other command must not be

issued during this state.

AT+CALA? Read command returns the list of current active alarm settings in the ME, in

the format:

[+CALA: <time>,<n>,<type>,[<text>],<recurr>,<silent>]

AT+CALA=? Test command returns the list of supported index values (currently just 0),

alarm types, maximum length of the text to be displayed, maximum length

of <recurr> and supported <silent>s, in the format:

+CALA: (list of supported <n>s),(list of supported <type>s),<tlength>,

<rlength>,(list of supported <silent>s)

Example

AT+CALA="02/09/07,23:30:00+00"

Reference 3gpp TS 27.007

3.5.4.4.13 Restricted SIM Access - +CRSM

+CRSM - Restricted SIM Access

AT+CRSM= Execution command transmits to the ME the SIM <command> and its