Specifications

UC864-E/G AT Commands Reference Guide
80304ST10041a Rev. 3 - 18/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 82 of 259
+CCUG - Closed User Group Supplementary Service Control
calls.
<index>
0..9 - CUG index
10 - no index (preferential CUG taken from subscriber data) (default)
<info>
0 - no information (default)
1 - suppress Outgoing Access (OA)
2 - suppress preferential CUG
3 - suppress OA and preferential CUG
AT+CCUG? Read command reports the current value of the parameters
AT+CCUG=? Test command returns the OK result code
Reference 3GPP TS 27.007
3.5.4.3.18 Preferred Operator List - +CPOL
+CPOL - Preferred Operator List
AT+CPOL=
[<index>][,<format>
[,<oper>][,<GSM_A
cT>,
<GSM_Compact_A
cT>,
<UTRAN_AcT]]
Execution command writes an entry in the SIM list of preferred operators.
Parameters:
<index> - integer type; the order number of operator in the SIM preferred
operator list
1..n
<format>
0 – long format alphanumeric <oper>
1 – short format alphanumeric <oper>
2 - numeric <oper>
<oper> - string type
<GSM_AcT> - GSM access technology
0 – access technology not selected
1 – access technology selected
<GSM_Compact_AcT> - GSM compact access technology
0 – access technology not selected
1 – access technology selected
<UTRA_AcT> - UTRA acess technology
0 – access technology not selected
1 – access technology selected
Note: if <index> is given but <oper> is left out, entry is deleted. If <oper> is
given but <index> is left out, <oper> is put in the next free location. If only
<format> is given, the format of the <oper> in the read command is
changed. Currently, <GSM_Compact_AcT> is not supported but set value
is acceptable.
AT+CPOL? Read command returns all used entries from the SIM list of preferred
operators.