Specifications

UC864-E/G AT Commands Reference Guide
80304ST10041a Rev. 3 - 18/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 79 of 259
+CUSD - Unstructured Supplementary Service Data
Note Only mobile initiated operations are supported
3.5.4.3.14 Advice Of Charge - +CAOC
+CAOC - Advice Of Charge
AT+CAOC=
<mode>
Set command refers to the Advice of Charge supplementary services that
enable subscriber to get information about the cost of calls; the command
also includes the possibility to enable an unsolicited event reporting of the
Current Call Meter (CCM) information.
Parameter:
<mode>
0 - query CCM value
1 - disables unsolicited CCM reporting
2 - enables unsolicited CCM reporting
Note: the unsolicited result code enabled by parameter <mode> is in the
format:
+CCCM: <ccm>
where:
<ccm> - current call meter in home units, string type: three bytes of the
CCM value in hexadecimal format (e.g. ā€œ00001Eā€ indicates decimal
value 30)
Note: the unsolicited result code +CCCM is sent when the CCM value
changes, but not more than every 10 seconds.
AT+CAOC? Read command reports the value of parameter <mode> in the format:
+CAOC: <mode>
AT+CAOC=? Test command reports the supported values for <mode> parameter.
Reference 3GPP TS 27.007
Note +CAOC command returns an estimate of the cost of the current call only,
produced by the MS and based on the information provided by either AoCI
or AOCC supplementary services; it is not stored in the SIM.
3.5.4.3.15 List Current Calls - +CLCC
+CLCC - List Current Calls
AT+CLCC Execution command returns the list of current calls and their characteristics
in the format:
[+CLCC:<id1>,<dir>,<stat>,<mode>,<mpty>,<number>,<type>
,<alpha>[<CR><LF>+CLCC:<id2>,<dir>,<stat>,<mode>,
<mpty>,<number>,<type>,<alpha>[…]]]