Specifications

UC864-E/G AT Commands Reference Guide
80304ST10041a Rev. 3 - 18/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 71 of 259
+CLCK - Facility Lock/Unlock
AT+CLCK =”AO”,2
+CLCK: <status>,1
+CLCK: <status>,2
+CLCK: <status>,4
3.5.4.3.6 Change Facility Password - +CPWD
+CPWD - Change Facility Password
AT+CPWD=<fac>,
<oldpwd>,
<newpwd>
Execution command changes the password for the facility lock function
defined by command Facility Lock +CLCK.
Parameters:
<fac> - facility
“SC” - SIM (PIN request)
“AB” - All barring services
“P2” - SIM PIN2
<oldpwd> - string type, it shall be the same as password specified for the
facility from the ME user interface or with command +CPWD.
<newpwd> - string type, it is the new password
Note: parameter <oldpwd> is the old password while <newpwd>
is the new
one.
AT+CPWD=? Test command returns a list of pairs (<fac>,<pwdlength>) which presents
the available facilities and the maximum length of their password
(<pwdlength>)
Example
at+cpwd=?
+CPWD: ("SC",8),("AB",4),("P2",8),("PS",8)
OK
Reference 3GPP TS 27.007
3.5.4.3.7 Calling Line Identification Presentation - +CLIP
+CLIP - Calling Line Identification Presentation
AT+CLIP=[<n>]
Set command enables/disables the presentation of the CLI (Calling Line
Identity) at the TE. This command refers to the UMTS supplementary
service CLIP (Calling Line Identification Presentation) that enables a called
subscriber to get the CLI of the calling party when receiving a mobile
terminated call.
Parameters:
<n>
0 - disables CLI indication (factory default)
1 - enables CLI indication