Specifications

UC864-E/G AT Commands Reference Guide

80304ST10041a Rev. 3 - 18/07/08

+COPS - Operator Selection

AT+COPS=? Test command returns a list of quadruplets, each representing an operator

present in the network.

The quadruplets in the list are separated by commas:

+COPS: : [list of supported (<stat>,long alphanumeric <oper>

,short alphanumeric <oper>,numeric <oper>[,< AcT>])s]

[,,(list of supported <mode>s),(list of supported <format>s)]

where:

<stat> - operator availability

0 - unknown

1 - available

2 - current

3 - forbidden

<AcT> access technology selected:

0 GSM

1 GSM Compact

2 UTRAN

Note: since with this command a network scan is done, this command may

require some seconds before the output is given.

Example

AT+COPS?

+COPS: 0,0,"Test PLMN 1-1",0

at+cops=?

+COPS: (2,"","","45008",2),(1,"Test PLMN 1-1","Test1-

1","00101",0),(3,"","","45005",2),,(0-4),(0-2)

Reference 3GPP TS 27.007

3.5.4.3.5 Facility Lock/Unlock - +CLCK

+CLCK - Facility Lock/Unlock

AT+CLCK=

[,<passwd>

[,<class>]]

Execution command is used to lock or unlock a ME or a network facility.

Parameters:

<fac> - facility

"SC" - SIM (PIN request) (device asks SIM password at power-up and

when this lock command issued)

"AO"- BAOC (Barr All Outgoing Calls)

"OI" - BOIC (Barr Outgoing International Calls)

"OX" - BOIC-exHC (Barr Outgoing International Calls except to Home

Country)

"AI" - BAIC (Barr All Incoming Calls)