Specifications

UC864-E/G AT Commands Reference Guide

80304ST10041a Rev. 3 - 18/07/08

+CNUM - Subscriber Number

AT+CNUM=? Test command returns the OK result code

Example

AT+CNUM

+CNUM: "PHONENUM1","2173848500",129

+CNUM: "FAXNUM","2173848501",129

+CNUM: "DATANUM","2173848502",129

Reference 3GPP TS 27.007

3.5.4.3.2 Read Operator Names - +COPN

+COPN - Read Operator Names

AT+COPN Execution command returns the list of operator names from the ME in the

format:

+COPN: <numeric1>,<alpha1>[<CR><LF>

+COPN: <numeric2>,<alpha2>[…]]

where:

<numericn> - string type, operator in numeric format (see +COPS)

<alphan> - string type, operator in long alphanumeric format (see +COPS)

Note: each operator code <numericn> that has an alphanumeric equivalent

<alphan> in the ME memory is returned

AT+COPN=? Test command returns the OK result code

Reference 3GPP TS 27.007

3.5.4.3.3 Network Registration Report - +CREG

+CREG - Network Registration Report

AT+CREG=

[<mode>]

Set command enables/disables network registration reports depending on

the parameter <mode>.

Parameter:

<mode>

0 - disable network registration unsolicited result code (factory default)

1 - enable network registration unsolicited result code

2 - enable network registration unsolicited result code with network Cell

identification data

If <mode>=1, network registration result code reports:

+CREG: <stat>

where

<stat>

0 - not registered, ME is not currently searching a new operator to