Specifications

UC864-E/G AT Commands Reference Guide

80304ST10041a Rev. 3 - 18/07/08

+CSNS - Single Numbering Scheme

asynchronous 9600 bps V.110 ISDN connection) for mobile originated calls,

ME/TA shall map the values into non-trasparent asynchronous 9600 bps

V.32 modem connection when single numbering scheme call is answered.

AT+CSNS? Read command returns current value of the parameter <mode>.

AT+CSNS=? Test command returns supported values of parameter <mode>.

Reference 3GPP TS 27.007

3.5.4.2.9 Voice Hang Up Control - +CVHU

+CVHU - Voice Hang Up Control

AT+CVHU=

[<mode>]

Set command selects whether ATH or "drop DTR" shall cause a voice

connection to be disconnected or not.

Parameter:

<mode>

0 - "Drop DTR" ignored but OK result code given. ATH disconnects.

1 - "Drop DTR" and ATH ignored but OK result code given.

2 - "Drop DTR" behaviour according to &D setting. ATH disconnects

(factory default).

AT+CVHU? Read command reports the current value of the <mode> parameter, in the

format:

+CVHU: <mode>

AT+CVHU=? Test command reports the range of supported values for parameter

<mode>

3.5.4.3 Network Service Handling

3.5.4.3.1 Subscriber Number - +CNUM

+CNUM - Subscriber Number

AT+CNUM Execution command returns the MSISDN (if the phone number of the

device has been stored in the SIM card) in the format:

+CNUM: <alpha>,<number>,<type>[<CR><LF>

+CNUM: <alpha>,<number>,<type>[…]]

where:

<alpha> - alphanumeric string associated to <number>; used character set

should be the one selected with +CSCS.

<number> - string containing the phone number in the format <type>

<type> - type of number:

129 - national numbering scheme

145 - international numbering scheme (contains the character "+").