Specifications

UC864-E/G AT Commands Reference Guide

80304ST10041a Rev. 3 - 18/07/08

D – Dial

following numeric equivalents shall be used:

1 - PPP

<cid> - a digit which specifies a particular PDP context definition (see

+CGDCONT command).

Example

To dial a number in SIM phonebook entry 6:

ATD>SM6

To have a voice call to the 6-th entry of active

phonebook:

ATD>6;

To call the entry with alphanumeric field “Name”:

ATD>”Name”;

Reference V25ter.

3.5.3.3.2 Tone Dial - T

T - Tone Dial

ATT Set command has no effect is included only for backward compatibility with

landline modems.

Reference V25ter.

3.5.3.3.3 Pulse Dial - P

P - Pulse Dial

ATP Set command has no effect is included only for backward compatibility with

landline modems.

Reference V25ter.

3.5.3.3.4 Answer - A

A - Answer

ATA Execution command is used to answer to an incoming call if automatic

answer is disabled.

Note: This command MUST be the last in the command line and must be

followed immediately by a <CR> character.

Reference V25ter.

3.5.3.3.5 Disconnect - H

H - Disconnect

ATH Execution command is used to close the current conversation (voice, data