Specifications

UC864-E/G AT Commands Reference Guide

80304ST10041a Rev. 3 - 18/07/08

+ICF - DTE-Modem Character Framing

Reference V25ter

Example

AT+ICF = 3 - 8N1 (default)

AT+ICF=?

+ICF: (3)

3.5.3.3 Call Control

3.5.3.3.1 Dial - D

D – Dial

ATD<number>[;] Execution command starts a call to the phone number given as parameter.

If “;” is present, a voice call to the given number is performed, regardless

of the current value of the connection mode set by +FCLASS command.

Parameter:

<number> - phone number to be dialed

Note: type of call (data, fax or voice) depends on last +FCLASS setting.

Note: the numbers accepted are 0-9 and *,#,”A”, ”B”, ”C”, ”+”.

ATD><str>[;] Issues a call to phone number which corresponding alphanumeric field is

<str>; all available memories will be searched for the correct entry.

If “;” is present a voice call is performed.

Parameter:

<str> - alphanumeric field corresponding to phone number; it must be

enclosed in quotation marks.

Note: parameter <str> is case sensitive.

Note: used character set should be the one selected with +CSCS.

ATD><mem><n>[;] Issues a call to phone number in phonebook memory storage <mem>,

entry location <n> (available memories may be queried with

AT+CPBS=?).

If “;” is present a voice call is performed.

Parameters:

<mem> - phonebook memory storage;

“SM” - SIM/UICC phonebook

“FD” - SIM/USIM fixed dialing phonebook

“LD” - SIM/UICC last dialing phonebook

“MC” – missed calls list

“RC” - Received calls list