Specifications

UC864-E/G AT Commands Reference Guide

80304ST10041a Rev. 3 - 18/07/08

3.5.3.2.3 Response Format - V

V - Response Format

ATV[<n>]

Set command determines the contents of the header and trailer transmitted

with result codes and information responses. It also determines if result

codes are transmitted in a numeric form or an alphanumeric form (see

[§3.2.3 Information Responses And Result Codes] for the table of result

codes).

Parameter:

<n>

0 - limited headers and trailers and numeric format of result codes

information responses <text><CR><LF>

result codes <numeric code><CR>

1 - full headers and trailers and verbose format of result codes (factory

default)

information responses <CR><LF>

result codes <CR><LF>

Note: the <text> portion of information responses is not affected by this

setting.

Note: if parameter is omitted, the command has the same behaviour of

ATV0

Reference V25ter