Specifications

UC864-E/G AT Commands Reference Guide
80304ST10041a Rev. 3 - 18/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 36 of 259
&V0 - Display Current Configuration And Profile
AT&V0 Execution command returns all the configuration parameters settings.
Note: this command is the same as &V, it is included only for backwards
compatibility.
3.5.3.1.16 S Registers Display - &V1
&V1 - S Registers Display
AT&V1 Execution command returns the value of the S registers in decimal and
hexadecimal value in the format:
REG DEC HEX
<reg0> <dec> <hex>
<reg1> <dec> <hex>
...
where
<regn> - S register number
000..005
007
012
025
038
<dec> - current value in decimal notation
<hex> - current value in hexadecimal notation
3.5.3.1.17 Extended S Registers Display - &V3
&V3 - Extended S Registers Display
AT&V3 Execution command returns the value of the S registers in decimal and
hexadecimal value in the format:
REG DEC HEX
<reg0> <dec> <hex>
<reg1> <dec> <hex>
...
where
<regn> - S register number
000..005
007
012
025
030
038
<dec> - current value in decimal notation
<hex> - current value in hexadecimal notation