Specifications

UC864-E/G AT Commands Reference Guide
80304ST10041a Rev. 3 - 18/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 35 of 259
+GMI - Manufacturer Identification
Reference V.25ter
3.5.3.1.10 Model Identification - +GMM
+GMM - Model Identification
AT+GMM Execution command returns the model identification.
Reference V.25ter
3.5.3.1.11 Revision Identification - +GMR
+GMR - Revision Identification
AT+GMR Execution command returns the software revision identification.
Reference V.25ter
3.5.3.1.12 Capabilities List - +GCAP
+GCAP - Capabilities List
AT+GCAP Execution command returns the equipment supported command set list.
Where:
+CGSM: 3GPP TS command set
+FCLASS: Fax command set
+DS: Data Service common modem command set
+ES: WCDMA data Service common modem command set
+MS: Mobile Specific command set
Reference V.25ter
3.5.3.1.13 Serial Number - +GSN
+GSN - Serial Number
AT+GSN Execution command returns the device board serial number.
Note: The number returned is not the IMSI, it is only the board number
Reference V.25ter
3.5.3.1.14 Display Current Base Configuration And Profile - &V
&V - Display Current Base Configuration And Profile
AT&V Execution command returns some of the base configuration
parameters settings.
3.5.3.1.15 Display Current Configuration And Profile - &V0