Specifications

UC864-E/G AT Commands Reference Guide
80304ST10041a Rev. 3 - 18/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 31 of 259
#NOPT - Set notification port
Interface.
Parameter:
<num> - Notification Port
0 – All Ports (Telit USB Modem,UART Data, USB Auxiliary)
Notification data is sent to all ports. < default value >
1 – UART Data Port only
2 – Telit USB Modem Port only
3 – Telit USB Auxiliary Port only
AT#NOPT? Read command reports the current notification port.
AT#NOPT=? Test command reports the available range of values for parameter <num>.